CERTIFICATES AND REPORTS

ISO-9001.2008-2017-EN-1-pdf-1

CLASSIFICATION OF SYSTEMS
ACCORDING TO ISO 12944:2018

Download PDF

ISO-9001.2008-2017-EN-1-pdf-1

NSF/ANSI/CAN 61
Certification for contact with potable water

The certification of NSF/ANSI/CAN 61 cover specific materials or products that come in contact with drinking water, drinking water
treatment chemical, or both.

NSF/ANSI/CAN 61 testing covers all products with drinking water contact from source to tap and determines what contaminants may migrate or leach from your product into drinking water. It also confirms if they are below the maximum levels allowed to be considered safe.

Download PDF

ISO-9001.2008-2017-EN-1-pdf-1

AS/NZS 4020:2005 TESTING OF PRODUCTS FOR USE IN CONTACT WITH DRINKING WATER

Report Information
Submitting Organisation :
Account :
AWQC Reference :
Project Reference :
Product Designation :
Composition of Product :
PT-1857
Zinga
96% Zinc in Dry Film (see MSDS and Technical Data Sheet for additional information).
142045 : Zintec Corrosion Solutions
142045-2012-CSR-1 : Prod Test: Zinga LGF
00121120 : Zintec Corrosion Solutions
Use of Product :
Product Manufacturer : Zingametall, BELGIUM.
In-Line/Protective Coating of Steel Assets.
Testing Requested : AS/NZS 4020:2005 TESTING OF PRODUCTS FOR USE IN CONTACT WITH
DRINKING WATER
Sample Selection: As provided by the submitting organisation.
Samples : Samples were prepared and controlled as described in Appendix A of AS/NZS
4020:2005
Product Type : Composite
Project Completion Date :
Extracts : Extracts were prepared as described in Appendix C, D, E, F, G, H.
23-Aug-2012
Project Comment :
The results presented herein demonstrate compliance to AS/NZS 4020 for Zinga, exposed at an area to volume ratio up to 1000 mm2/L at 20°C ± 2°C.

ISO-9001.2008-2017-EN-1-pdf-1

Product: Compound ZINGA

Containing: mocronised zinc

Destined for:

ant-corrosion protection of steel surfaces, including inner surfaces of steel tanks designed to store potable water for peopleThe above mentioned product is acceptable according to hygenic criteria with the following
conditions:
The compound destined for professional use. Each container covered with the compound must be paintaikingly washed with water.
There must be a label in Polish on the packaging, which should include recommendations concerning precautions – as in Safety Data Sheet of the product, in accordance with the proper law regulations.
The product should be kept out of children’s reach.

ISO-9001.2008-2017-EN-1-pdf-1

ISO 12944:2018

Most important changes from ISO 12944:2007

Overview

ISO 12944 is one of the most important international standards for the protection of steel against corrosion by protective paints systems.

This presentation provides information about the revision of the ISO 12944 standard, showing the most relevant differences between the new (2018) and previous version (2007).

It also shows the update in certifications of ZINGA® unique & multiple layer systems

ISO-9001.2008-2017-EN-1-pdf-1

ISO 9001:2008 CERTIFICATE

ISO 9001 certification.

ISO 9001.2008 (2017) EN

cert_2

ISO 12944 ON ZINGA + ZINGACERAM HS + ZINGACERAM EP

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_3

ISO 12944 ON ZINGA + ZINGACERAM HS + ZINGACERAM PU

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_4

ISO 12944 ON ZINGA + ZINGACERAM HS

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_5

ISO 12944 ON ZINGA + ZINGALUFER

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_6

NORSOK M-501 SYST 1 & 7 ON ZINGA 2 X 60 ΜM DFT

NORSOK M-501 is an industry standard for adequate surface preparation and use of coating materials, developed with the emergence of the Norwegian oil industry

ETA-e1438691247858

EUROPEAN TECHNICAL APPROVAL

Approval from EOTA (European Organization for Technical Approvals) and its ETA certificate number

cert_8

ANTI-SLIP COEFFICIENT OF HIGH STRENGTH BOLTS ADJOINING STEEL SECTIONS

GB 50017-2003 Code for design of steel structures
GB 50205-2001 Code for Acceptance of Construction Quality of Steel Structures

cert_9

COEFFICIENT OF RESISTANCE TO SLIP-SLIDING ON FRICTION SURFACES OF OVERLAPPING STEEL PLATES

GB 50017-2003 Code for design of steel structures

cert_10

ISO 12944 ON ZINGA 2 X 60 ΜM DFT

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_11

ISO 12944 ON ZINGA 2 X 90 ΜM DFT

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

cert_12

ISO 12944 ON ZINGA + ZINGATARFREE

ISO 12944-6: Paints and varnishes — Corrosion protection of steel structures by protective paint systems

Lloyds Register Recognition void spaces tot 2022 1 pdf-1

LLOYDS REGISTER RECOGNITION

ZINGA has been approved for use in void spaces (all internal structures except for oil tanks and ballast tanks) by Lloyd’s Register

stripe

Contact Us

    Igoe International Ltd – ZINGA Distributors

    135 Slaney Road,
    Dublin Industrial Estate
    Glasnevin
    Dublin D11 AW6D
    Ireland

    Website www.zinga.ie

    See also www.igoe.ie

    01 830 22 50 / 830 22 49

    info@igoe.ie